excl. 19% VAT, plus shipping.
Product Search

You are here: / MoTec / MoTec ECU
Product Details
MDC for Mitsubishi Evo 7,8,9

MDC for Mitsubishi Evo 7,8,9

ArtNr.: 14012

Motec, Australia Manufacturer: Motec, Australia

  Delivery 1-2 days

Reduced from 1.255,42 € (Our normal price.)
now only 1.032,02 €
plus shipping
Please login to access Wish List.

MDC for Mitsubishi Evo 7,8,9

MoTeCís Mitsubishi Diff Controller (MDC) replaces the factory fitted Active Centre Diff (ACD) controller. It is a bolt-in replacement for Lancer Evo 7, 8 and 9 models, making use of the factory mounting points under the dashboard. The MDC can be used in vehicles fitted with the ACD/AYC (Active Yaw Control), but the AYC will be disabled.

It is worth considering the installation of a MoTeC M800 Plug-In ECU in addition to the MDC to take advantage of several additional features. Using the RS232 serial communication link, all values from sensors connected to the MDC can be logged in the M800 Plug-In ECU without having to duplicate any of the sensors.


The MDC is used to adjust the torque split between the front and rear differentials to achieve greater control over handling characteristics such as traction, braking on loose surfaces, turn-in response, and understeer on both corner entry and exit.

The centre differential is essentially a limited slip differential with adjustable preload. The preload is proportional to the fluid pressure in the centre differential. The MDC works by regulating solenoid current, which in turn, controls the fluid pressure. When no pressure is applied (0% lock) the centre differential operates as an 'open diff'. With increasing fluid pressure (increasing percentage lock) the preload increases, requiring more torque difference between front and rear wheels before the centre differential will slip.

There are six selectable control modes: 0% lock, 100% lock and four user-configurable modes. These modes can be cycled through using the factory dash mounted ACD button.

Basic specifications


  • 1 x CAN
  • 1 x RS232


  • Connector
    2 x Connectors fitting directly into factory wiring
    • 1 x 26 pin
    • 1 x 22 pin
Case size
111 x 83 x 31 mm, excluding mounts
  • 6 x Selectable control modes:
    • 1 x 0% lock mode
    • 4 x user-defined modes
    • 1 x 100% lock mode
  • Control modes can be selected using the dash mounted ACD button.
  • Each mode is configurable with an acceleration table, braking table and desired slip table.
  • The percentage lock can be configured using vehicle speed and throttle position. With the MoTeC Plug-In ECU connected, engine efficiency point can be used instead of throttle position. The ECU will calculate and then send the efficiency point to the MDC. This feature uses the factory wiring loom.
  • With the RS232 serial communications configured, the MDC can send wheel speeds, lateral G-force, longitudinal G-force, steering position, diff parameter and fault codes to the MoTeC M800 Plug-In ECU without the need for additional sensors.

  • The CAN interface optionally transmits the sensor and diagnostic information to a MoTeC Dash Logger.

  • Handbrake override.

[?] Questions about this product ?
Product Review
No review available for this item.
You have to be logged in to write a review.
Current product
MDC for Mitsubishi Evo 7,8,9 1.032,02 €*
Deliverable: Quantity:
Keep me
Open account
Forgot Password



ArtNr.: 61059
more Info

196,00 €*

Customer who ...
Customers who bought this product also purchased:
ACD Pump Cover
ArtNr.: 900
more Info

128,89 €*
M800 for
Mitsubishi Evo9...

ArtNr.: 13010A
more Info

1.899,00 €*
Master Cylinder
for Hydraulic...

ArtNr.: CP6026-91
more Info

379,17 €*
M800 Logging
Memory - 1 MB

ArtNr.: 28101
more Info

199,00 €*